- Home
- Parker Instrumentation Division
- Fittings
- Tube Fittings and Equipment
- Double Ferrule Fittings
- Front and Back Ferrule Sets for Single and Two Ferrule Tube Fittings
Products
-
VNE
-
BPE Fittings
- Weld by Clamp Fittings / Clamp by Clamp Fittings
- Weld Fittings (WELD)
-
BPE Fittings
-
Parker Instrumentation Division
- Valves
-
Fittings
- Flareless and Bite Type
- Pipe
-
Tube and Equipment
- Single Ferrule Fittings
- Tube Fabrication Equipment
-
Double Ferrule Fittings
- Front and Back Ferrules for Two Ferrule Tube Fittings - A-LOK Series
- Parker Tube Fitting, BSP Taper Female Connector - A-LOK Series
- Parker Tube Fitting, BSP Taper Male Adapter - A-LOK Series
- Parker Tube Fitting, NPT Male Adaptor - A-LOK Series
- Parker Tube Fitting, Male Run Tee SAE Straight Thread - A-LOK Series
- Parker Tube Fitting, Male Connector to O-Ring Straight - A-LOK Series
- Parker Tube Fitting, Tube End Converter - A-LOK Series
- Parker Tube Fitting, Tube End Bulkhead Adapter - A-LOK Series
- Mud Dauber
- Parker Tube Fitting, Thermocouple Connector - A-LOK Series
- Parker Tube Fitting, Union Tee - A-LOK Series
- Parker Tube Fitting, Union Elbow - A-LOK Series
- Parker Tube Fitting, Reducing Union - A-LOK Series
- Parker Tube Fitting, Bulkhead Union - A-LOK Series
- Parker Tube Fitting, NPT Female Bulkhead Connector - A-LOK Series
- Parker Tube Fitting, NPT Female Connector - A-LOK Series
- Parker Tube Fitting, Male Connector to SAE Staright Thread - A-LOK Series
- Parker Tube Fitting, Push-Lok to Tube Adapter - A-LOK Series
- Parker Tube Fitting, NPT Female Run Tee - A-LOK Series
- Parker Tube Fitting, Male SAE Straight Thread Elbow - A-LOK Series
- Parker Tube Fitting, NPT Tube End Male Adapter - A-LOK Series
- Parker Tube Fitting, NPT Male Elbow - A-LOK Series
- 37° Flare to Parker Tube Fitting
- Parker Tube Fitting, BSP Taper Male Elbow - A-LOK Series
- Parker Tube Fitting, BSPP Tube End Adapter - A-LOK Series
- Parker Tube Fitting, Conversion Union - A-LOK Series
- Parker Tube Fitting, NPT Male 45° Elbow - A-LOK Series
- Parker Tube Fitting, Tube End NPT Female Adapter - A-LOK Series
- Parker Tube Fitting, BSPP Male Connector - A-LOK® Series
- Parker Tube Fitting, NPT Female Elbow - A-LOK Series
- Parker Tube Fitting, Union - A-LOK Series
- Tube Fitting, Inverted Two ferrule Compression - MPI Series
- Parker Tube Fitting, BSP Taper Female Adapter - A-LOK Series
- Parker Tube Fitting, BSPP Male Elbow (Positionable) - A-LOK Series
- Parker Tube Fitting, Dielectric Union Adapter - A-LOK Series
- Buttweld Connector
- Instrumentation Tube Nuts
- Parker Tube Fitting, Union Cross - A-LOK Series
- Parker Tube Fitting, NPT Female Branch Tee - A-LOK Series
- Parker Tube Fitting, Tube End Reducer - A-LOK Series
- Parker Tube Fitting, NPT Male Connector - A-LOK® Series
- Parker Tube Fitting, NPT Male Branch Tee - A-LOK Series
- Parker Tube Fitting, NPT Male Run Tee - A-LOK Series
- Parker Tube Fitting, Port Connector - A-LOK Series
- Parker Tube Fitting, NPT Male Bulkhead Connector - A-LOK Series
- Parker Tube Fitting, BSP Taper Male Connector - A-LOK® Series
- Front and Back Ferrule Sets for Single and Two Ferrule Tube Fittings
Front and Back Ferrule Sets for Single and Two Ferrule Tube Fittings
The ferrule, perhaps the most-critical component in compression fittings, is highly engineered and, to function properly requires considerable design, metallurgy, and production expertise. Not all products on the market meet these stringent requirements. The ferrule must precisely deform elastically and plastically during fitting assembly to properly grip and seal the tubing. Its front edge must be harder than the tubing to grip and seal through surface scratches and defects, but if the entire ferrule is too hard, it may not deform properly. Therefore, only the gripping edge of the ferrule is hardened while the rest has different, tightly controlled mechanical properties. Also, the hardening process must not compromise stainless steel's corrosion resistance. And finally, production processes must consistently turn out defect-free ferrules that hold tight tolerances and maintain metallurgical specifications.
Industries:
• Chemical
• Transportation
• Power
• Oil and Gas
• Research Labs
Features/Benefits:
• Contains ten individual ferrule sets
• Ferrule sets may be dispensed one at a time
Applications:
• Instrumentation Hook-up Systems
• Analytical Installations
• Offshore Control Panels
• Sensing Lines
Parts
1 FERRULE SET 316 ALOK
3/4 FERRULE SET 316 ALOK
1/2 FERRULE SET 316 ALOK
3/8 FERRULE SET BRASS ALOK
3/8 FERRULE SET 316 ALOK
1/4 ALOK SET BRASS ALOK
1/4 FERRULE SET 316 ALOK
1/8 FERRULE SET 316 ALOK